產品詳情
簡單介紹：
溫度補償的含水率監測儀在原油、烴類或其他*高25％的到1000PPM以下的低介電液中，專為客戶提供*高的靈敏度、分辨率以及含水量的測量精度。WCM7300帶溫度補償的含水率監測儀的增強數字信號處理和全過程溫度補償兩項技術的使用大大提高了這個設備。
詳情介紹：
WCM7300溫度補償的含水監測儀
在7300 WCM測量產品的全過程中，溫度補償并適時計算出正確的含水監測值，提供一個真正的含水監測值或S＆W的監測值，在任何溫度下并*高可達160°F。探頭尺寸可從2”至12”。4-20mA和0-5伏的輸出可用于遠程讀取。含水監測值、過程溫度或探頭電氣值可以通過使用附帶磁鐵來操作內部**開關直接查看而不需除去端蓋。
Features：
NACE Adaptable - Can be modified for use in sour service.
Applications：
LACT (Lease Automatic Custody Transfer) Units
Detect and provide relay contact closure that can be used to reroute oil that has excess S&W.
Pipeline Loading
Monitor transfer of petroleum/condensate products from loading facilities.
Dehydration Equipment
Determine and enhance equipment efficiencies, by monitoring the product and indicating water content.
Fuel Oil Monitoring
Determine contamination of fuel oil by condensation, or other external factors, before entry to engine.
Storage and Treating Facilities
Monitoring and early detection of undesirable conditions as well as interface detection during de-watering of storage
tanks.
Measurement/Monitor Specifications：
Power Supply
20-30 Vdc +/-10% @ nominal, 100 mA max.
S&W Full Scale Range
0-25% Field adjustable to 0-5%, 0-10%, etc.
Accuracy
Is defined as the variance observed between the 7300 reading and the water grindout of the oil.
Normal variances are:
+/-.05 from 0 to 5% water
+/-.1 from 5 to 10% water
+/-.15 from 10% to 15% water
+/-.2 to .25 from 15 to 25% water
Displays
One line 16 character, alphanumeric LCD showing by selection:
Water Cut
Process Temperature
Probe Electrical Value
Red/Green LED showing good oil, bad oil, or by passing,condition.
Process Connections
Flange, grooved, MNPT.
Pressure Ratings
As per Flange selection, 1440 psig max. (Others by special order)
NPT - 1440 psig max.
Victualic grooved - 350 psig
Enclosure
NEMA 7 explosion-proof, Class I, Division 2, Group C and D.
在7300 WCM測量產品的全過程中，溫度補償并適時計算出正確的含水監測值，提供一個真正的含水監測值或S＆W的監測值，在任何溫度下并*高可達160°F。探頭尺寸可從2”至12”。4-20mA和0-5伏的輸出可用于遠程讀取。含水監測值、過程溫度或探頭電氣值可以通過使用附帶磁鐵來操作內部**開關直接查看而不需除去端蓋。
Features：
NACE Adaptable - Can be modified for use in sour service.
Applications：
LACT (Lease Automatic Custody Transfer) Units
Detect and provide relay contact closure that can be used to reroute oil that has excess S&W.
Pipeline Loading
Monitor transfer of petroleum/condensate products from loading facilities.
Dehydration Equipment
Determine and enhance equipment efficiencies, by monitoring the product and indicating water content.
Fuel Oil Monitoring
Determine contamination of fuel oil by condensation, or other external factors, before entry to engine.
Storage and Treating Facilities
Monitoring and early detection of undesirable conditions as well as interface detection during de-watering of storage
tanks.
Measurement/Monitor Specifications：
Power Supply
20-30 Vdc +/-10% @ nominal, 100 mA max.
S&W Full Scale Range
0-25% Field adjustable to 0-5%, 0-10%, etc.
Accuracy
Is defined as the variance observed between the 7300 reading and the water grindout of the oil.
Normal variances are:
+/-.05 from 0 to 5% water
+/-.1 from 5 to 10% water
+/-.15 from 10% to 15% water
+/-.2 to .25 from 15 to 25% water
Displays
One line 16 character, alphanumeric LCD showing by selection:
Water Cut
Process Temperature
Probe Electrical Value
Red/Green LED showing good oil, bad oil, or by passing,condition.
Process Connections
Flange, grooved, MNPT.
Pressure Ratings
As per Flange selection, 1440 psig max. (Others by special order)
NPT - 1440 psig max.
Victualic grooved - 350 psig
Enclosure
NEMA 7 explosion-proof, Class I, Division 2, Group C and D.
